1. Frequency

For different equipment, the frequency of the cleaning machine needs to be adjusted. Not all equipment can be adjusted according to the same frequency. For example, for some mechanical equipment with hard surface, the frequency can be higher. However, for some electronic products or plastic products, if the frequency of the cleaning machine is so high, these products will have quality problems.

2. Power

Product capacity is directly related to ultrasonic power (ultrasonic power is 0.3-0.5w/cm2). High power products are mainly used to clean general objects or heavy pollution in hardware, machinery and other industries (ultrasonic power is 0.5-1w / cm2).

3. Time

The cleaning time of different equipment is also different, so the time should be controlled well and controlled within 10-20min as far as possible. If the time is too short, the effect is not good, and if the time is too long, it is easy to cause problems on the equipment surface and affect the finish.

4. Temperature

Due to the different physical characteristics of each equipment, different cleaning temperatures shall be selected. For example, it is appropriate for the general cleaning grease to be more than 50 ° C; For aluminum alloy, it is generally appropriate to choose about 40 ° C. if the temperature is too high, oxidation spots will be formed; Burr generally adopts the unique constant temperature technology below 15 ° C to ensure that the cleaning object will not be damaged when working in the constant temperature environment (the constant temperature of our constant temperature products is 0-80 ° C, ± 2 ° C).