1. Technical parameters of oil cylinder controlled cleaning machine

On the oil cylinder washer, there are also some important technical main parameters. If the specific situation is OK, they are mainly the flow and head of the water supply system, as well as the basic rated speed and rated power. The above four analysis are very important, so they are indispensable.

2. Safety precautions and instructions for oil cylinder controlled cleaning machine

(1) As the oil cylinder cleaning machine is a large-scale cleaning machine, the operating procedures of the general cleaning machine must be observed in the operating procedures, and illegal operation is strictly prohibited. In addition, the inspection before work, like ordinary cleaning machines, should also be paid attention to, taken seriously and implemented, so as to find and solve problems in time.

(2) The quality and dosage of the cleaning fluid required by the cleaning machine shall be guaranteed. If the quality of the cleaning fluid does not meet the standard, the cleaning effect will become worse. If the quantity is not enough, the cleaning effect will become worse.

(3) In order to achieve the cleaning effect, if the problem is in the cleaning solution, it is necessary to replace other cleaning solutions to meet the cleaning requirements. For the use of cleaning fluid, after using for a period of time, water and a certain proportion of cleaning agent shall be added in time to maintain its normal concentration and keep the liquid level at a certain height. In this way, good cleaning effect can be guaranteed.